Skip to Content
mobile menu

HD-RTR System for Weld Inspection

Large Diameter SWSI with orbiting head crawler (Photo A)
Large Diameter SWSI with orbiting head crawler
(Photo A)
SWSI with existing crawler (Photo B)
SWSI with existing crawler
(Photo B)
DWSI with external CP x-ray (Photo C)
DWSI with external CP x-ray
(Photo C)
Weld Scan
Weld Scan
Wire 13 of Duplex split on 3mm Fe
Wire 13 of Duplex split on 3mm Fe
μHDRTR Detector
μHDRTR Detector

Typical Applications

  • Pipe Mill seam and double joint stations
  • LPG tank construction
  • Pipeline Construction Off-Shore & On-shore:
    1. Large Diameter SWSI with orbiting head crawler (photo A)
    2. SWSI with existing crawler (photo B)
    3. DWSI with external CP x-ray (photo C)

Specifications

  • Continuously scans welds as single strip
  • Inspection width of 74mm
  • Scans at up to 48mm/second
  • Better than 50 micron pixel resolution
  • Field changeable scintillator
  • On-board chiller for sensor & electronics
  • 40C + ambient continuous operation
  • Sealed to IP65 rating
  • Rated to 300kV CP X-ray
  • 16 Bit digitisation
  • Better than 1.3% Wire IQI (>10mm WT)
  • Single USB2 Output for up to 2 detectors
  • Meets BS EN ISO 17636-2 and API 1104
  • Long Detector life: > 100,000m of weld
  • Un-cooled version for factory use
  • Comprehensive iX-HDRTR Software
  • Can drive up to two buggies on weld band

μHDRTR Detector

Features and Benefits

  • Continuous scanning of welds at up to 25mm per second
  • Suitable for EB, laser and thinner metal sections (<10mm)
  • Ultra High Resolution with better than 25μm pixel pitch
  • Splits Wire 13 of Duplex at 20% depth
  • High contrast image with high signal-noise ratio
  • Shielded to 225kV X-rays
  • 25mm weld width coverage
  • 16 bit digital output via USB2
  • Comprehensive ’iX-HDRTR’ software package
SEND US A MESSAGE
SEND US A MESSAGE

* Required fields