Skip to Content
mobile menu

Venlo Cabinet Series

Venlo Cabinet Series
Venlo Cabinet Series
HPX6 –450CT Cabinet Series
HPX6 –450CT Cabinet Series
Triple Concrete X-ray enclosures with Steel/Lead/ Steel access doors for Aerospace application
Triple Concrete X-ray enclosures with Steel/Lead/ Steel access doors for Aerospace application
  • Four x-ray energies available: 160kV, 225kv, 320kV and 450kV
  • Strong steel frame cabinet with internal lead (Pb) shielding cube and side enclosure for x-ray generators, motor drives. Pneumatically operated door
  • Inspects components up to 600mm high by 500mm wide
  • Precision, CT quality turntable with 50Kg component carrying capacity
  • Five axes, stepper motor driven manipulator with micro-stepping drives
  • Small focal spot x-ray sources (0.4mm/1mm) or 160/225kV micro-focus source
  • 41cm x 41cm amorphous silicon flat panel detector. Additional LDA option
  • Fast, 64 bit industrial PC Workstation for acquisition and two monitors
  • iX-Control DR Software. CT option with GP acceleration for fast reconstruction
  • Other options include Linear Array Detectors (LDAs), extended vertical
  • Manipulator travels, different flat panels and twin x-ray sources

HPX6 –450CT Cabinet Series

  • Two versions available: HPX6 and extended vertical travel version HPX6E
  • Strong steel frame cabinet with internal lead (Pb) shielding cube and side enclose for x-ray generators, motor drives. Pneumatically operated door
  • Inspects components up to 800mm high (1340mm with HPXE-450CT option)
  • 100Kg component carrying capacity. Motorised component load/unload
  • Composite granite manipulator bed for precision accuracy and repeatability
  • Internal climate control for long-term temperature stability
  • Six axes, stepper motor driven manipulator with absolute position encoders
  • Small focal spot 450kV x-ray source (0.4mm/1mm). Option for 600kV source
  • 41cm x 41cm amorphous silicon flat panel detector. Additional LDA option
  • iX-Control DR and CT software with GP acceleration for fast reconstruction
  • PC Workstation for acquisition. Separate reconstruction PC Workstation

Custom Cabinets & Enclosures

SIS will design/manufacture x-ray cabinets or enclosures to specifically meet your requirements. From steel/lead or concrete construction covering 100kV to 15 MV.

Turnkey solutions from initial design to Project Management of the construction and radiation testing. A full range of safety and lock-up systems are available as well as warning lamps, key exchange and safety monitoring.

SEND US A MESSAGE
SEND US A MESSAGE

* Required fields